NetTalk Central

NetTalk Web Server => Web Server - Ask For Help => Topic started by: ccordes on February 02, 2012, 05:01:58 PM

Title: conditional radio button fail in 6.17
Post by: ccordes on February 02, 2012, 05:01:58 PM

This works in 6.15 - I set include conditions on some radio button options based on the primed value of a field during an insert.
Updated to 6.17. then it didn't work - the options never showed.
Reverted back to 6.15 - customer is happy again.

I have not done a compare between the two versions so I'm not sure what may've changed to cause this.

Title: Re: conditional radio button fail in 6.17
Post by: bruce2 on February 02, 2012, 07:11:24 PM

Example needed.

Title: Re: conditional radio button fail in 6.17
Post by: ccordes on February 03, 2012, 07:12:08 AM

Since this is part of a much larger project I will try to make a simple example.
Thanks

Title: Re: conditional radio button fail in 6.17
Post by: Bruce on February 03, 2012, 08:00:20 AM

yes, ideally you can tweak one of the simple shipping examples (1,2,3) to show the effect.
If you can't, well then you need to dig a bit deeper to see what the exact combination of settings are that is causing the problem.