NetTalk Central
NetTalk E-Mail => E-Mail - Ask For Help => Topic started by: urayoan on August 24, 2022, 09:28:09 AM
-
Hello
In the ThisSendEmail object there's a section called ErrorTrap(errorStr,functionName). It is possible to trap just the error number based on the exception or what cause the specific error?
The reason I ask is, because is not the same to have a wrong written email vs a connection timeout. based on the error number I can make a choice to delete that email from the sending queue or just keep it to try to send it again when the connection is available again.
Thanks
-
Hi Ura,
Noted. At the moment there isn't an error code number, so I guess you'd need to filter based on the parameters.
cheers
Bruce
-
Thanks Bruce
Yes, im noticing in errorStr you show the server message that is not always the same depending the service. The other thing I noticed is the functionName shows this (at least in the tests I did) ,
NetEmailSend.Process <= when there's a problem sending for example, bad address etc
NetSimple.TakeEvent <= Usually connection timeout
There are other type of errors there? If what I saw is what I thin it is, that may help me to discern if it is a network issue or configuration to the SMTP service problem or a bad address problem (or possibly others)
Thanks again