This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
Web Server - Ask For Help / Changing the json results of a netwebservicemethod without using external name
« on: April 04, 2024, 05:14:15 AM »
I have several tables that I need to change the way the json is created. I originally had used the external name of the table field to force the json to use upper and lower case. This worked great but, I have to convert these tables to the IPDriver which has proven to not like external names on any fields. Removing the external names fixes all my IPDriver problems but now my nettalk web service methods are not properly setup to translate the json. I found that reflection might be able to solve my issue. I have been able to use json.reflection.walk() to see what is being done with the json. I have been able to use json.reflection.rename() to change the reflection entry. I am not able to figure out where to put this code as I am not getting the results I would like. Nothing is actually getting renamed. I only see that I will need to make these translations on loading and saving of the table for gets as well as updates and adds.
from debugview
797 611.954211 7984 MSCClientWeb.exe [3][rf]FIELD: GroupName=[MSCVERView] ColumnName=[MSCVER:VERSIONSEQUENCE] Num=[0] Type=[rf:NotSet] Rename=[VersionSequence] Pic=[] Attributes=[]
Any help would be appreciated on this.
from debugview
797 611.954211 7984 MSCClientWeb.exe [3][rf]FIELD: GroupName=[MSCVERView] ColumnName=[MSCVER:VERSIONSEQUENCE] Num=[0] Type=[rf:NotSet] Rename=[VersionSequence] Pic=[] Attributes=[]
Any help would be appreciated on this.
2
Web Server - Share Knowledge / CyberSource Payment API
« on: April 13, 2023, 07:07:23 AM »
Code for creating the post and header information.
MAP
CyberSource:FormatMessage (),STRING
CyberSource:GenerateHeader (*NetWebClient pWeb,STRING PostString)
CyberSource:GenerateSignatureFromParams(STRING signatureParams, STRING secretKey),STRING
END
CODE
PostURL = 'https://apitest.cybersource.com/pts/v2/payments'
PostString = CyberSource:FormatMessage()
CyberSource:GenerateHeader(ThisWebClient, PostString)
ThisWebClient.Post(PostURL,PostString)
CyberSource:FormatMessage PROCEDURE
element Group,Name('element')
clientReferenceInformation Group,Name('clientReferenceInformation')
code_ STRING(255),Name('code')
End
paymentInformation Group,Name('paymentInformation')
card Group,Name('card')
number STRING(255),Name('number')
expirationMonth STRING(255),Name('expirationMonth')
expirationYear STRING(255),Name('expirationYear')
End
End
orderInformation Group,Name('orderInformation')
amountDetails Group,Name('amountDetails')
totalAmount STRING(255),Name('totalAmount')
currency STRING(255),Name('currency')
End
billTo Group,Name('billTo')
firstName STRING(255),Name('firstName')
lastName STRING(255),Name('lastName')
address1 STRING(255),Name('address1')
locality STRING(255),Name('locality')
administrativeArea STRING(255),Name('administrativeArea')
postalCode STRING(255),Name('postalCode')
country STRING(255),Name('country')
email STRING(255),Name('email')
phoneNumber STRING(255),Name('phoneNumber')
End
End
End
json jsonClass
strElement StringTheory
CODE
CLEAR(element)
element.clientReferenceInformation.code_ = 'TC50171_3'
element.paymentInformation.card.number = '4111111111111111'
element.paymentInformation.card.expirationMonth = '12'
element.paymentInformation.card.expirationYear = '2031'
element.orderInformation.amountDetails.totalAmount = '102.21'
element.orderInformation.amountDetails.currency = 'USD'
element.orderInformation.billTo.firstName = 'John'
element.orderInformation.billTo.lastName = 'Doe'
element.orderInformation.billTo.address1 = '1 Market St'
element.orderInformation.billTo.locality = 'san francisco'
element.orderInformation.billTo.administrativeArea = 'CA'
element.orderInformation.billTo.postalCode = '94105'
element.orderInformation.billTo.country = 'US'
element.orderInformation.billTo.email = 'test@cybs.com'
element.orderInformation.billTo.phoneNumber = '4158880000'
json.start()
json.SetTagCase(jf:CaseAsIs)
json.Save(element,strElement)
strElement.LineEndings(st:Unix)
return strElement.GetValue()
CyberSource:GenerateHeader PROCEDURE (*NetWebClient pWeb,STRING PostString)
lSecretKey STRING(100)
KeyId STRING(100)
MerchantId STRING(100)
HostName STRING(100)
HostTarget STRING(100)
strPost StringTheory
strHost StringTheory
CODE
lSecretKey = 'yourkey'
KeyId = 'yourid'
MerchantId = 'yourco'
HostName = 'apitest.cybersource.com'
HostTarget = 'post /pts/v2/payments/'
strPost.SetValue(CLIP(PostString))
strPost.SetValue(NetMakeHash(strPost.GetValuePtr(),strPost.Length(),net:CALG_SHA_256))
strPost.Base64Encode()
strHost.SetValue('host: ' & CLIP(HostName) & '<10>' &|
'(request-target): ' & CLIP(HostTarget) & '<10>' &|
'digest: SHA-256=' & strPost.GetValue() & '<10>' &|
'v-c-merchant-id: ' & CLIP(MerchantId) & '')
pWeb.CustomHeader = 'v-c-merchant-id: ' & CLIP(MerchantId) & '<13,10>' &|
'v-c-date: "' & CLIP(pWeb.CreateGMTDate()) & '"' & '<13,10>' &|
'digest: SHA-256=' & strPost.GetValue() & '<13,10>' &|
'Signature: keyid="' & CLIP(KeyId) & '", algorithm="HmacSHA256",' &|
' headers="host (request-target) digest v-c-merchant-id", signature="' &|
CyberSource:GenerateSignatureFromParams(strHost.GetValue(), lSecretKey) & '"'
CyberSource:GenerateSignatureFromParams PROCEDURE (STRING signatureParams,STRING secretKey) ! Declare Procedure
strParams StringTheory
strKey StringTheory
CODE
strParams.SetValue(signatureParams,st:clip)
strKey.SetValue(secretKey,st:clip)
strKey.Base64Decode()
strParams.ToUnicode()
strParams.SetValue(NetMakeHMAC(strParams.GetValuePtr(), strParams.Length(), strKey.GetValue(), net:CALG_SHA_256))
strParams.Base64Encode()
return strParams.GetValue()
MAP
CyberSource:FormatMessage (),STRING
CyberSource:GenerateHeader (*NetWebClient pWeb,STRING PostString)
CyberSource:GenerateSignatureFromParams(STRING signatureParams, STRING secretKey),STRING
END
CODE
PostURL = 'https://apitest.cybersource.com/pts/v2/payments'
PostString = CyberSource:FormatMessage()
CyberSource:GenerateHeader(ThisWebClient, PostString)
ThisWebClient.Post(PostURL,PostString)
CyberSource:FormatMessage PROCEDURE
element Group,Name('element')
clientReferenceInformation Group,Name('clientReferenceInformation')
code_ STRING(255),Name('code')
End
paymentInformation Group,Name('paymentInformation')
card Group,Name('card')
number STRING(255),Name('number')
expirationMonth STRING(255),Name('expirationMonth')
expirationYear STRING(255),Name('expirationYear')
End
End
orderInformation Group,Name('orderInformation')
amountDetails Group,Name('amountDetails')
totalAmount STRING(255),Name('totalAmount')
currency STRING(255),Name('currency')
End
billTo Group,Name('billTo')
firstName STRING(255),Name('firstName')
lastName STRING(255),Name('lastName')
address1 STRING(255),Name('address1')
locality STRING(255),Name('locality')
administrativeArea STRING(255),Name('administrativeArea')
postalCode STRING(255),Name('postalCode')
country STRING(255),Name('country')
email STRING(255),Name('email')
phoneNumber STRING(255),Name('phoneNumber')
End
End
End
json jsonClass
strElement StringTheory
CODE
CLEAR(element)
element.clientReferenceInformation.code_ = 'TC50171_3'
element.paymentInformation.card.number = '4111111111111111'
element.paymentInformation.card.expirationMonth = '12'
element.paymentInformation.card.expirationYear = '2031'
element.orderInformation.amountDetails.totalAmount = '102.21'
element.orderInformation.amountDetails.currency = 'USD'
element.orderInformation.billTo.firstName = 'John'
element.orderInformation.billTo.lastName = 'Doe'
element.orderInformation.billTo.address1 = '1 Market St'
element.orderInformation.billTo.locality = 'san francisco'
element.orderInformation.billTo.administrativeArea = 'CA'
element.orderInformation.billTo.postalCode = '94105'
element.orderInformation.billTo.country = 'US'
element.orderInformation.billTo.email = 'test@cybs.com'
element.orderInformation.billTo.phoneNumber = '4158880000'
json.start()
json.SetTagCase(jf:CaseAsIs)
json.Save(element,strElement)
strElement.LineEndings(st:Unix)
return strElement.GetValue()
CyberSource:GenerateHeader PROCEDURE (*NetWebClient pWeb,STRING PostString)
lSecretKey STRING(100)
KeyId STRING(100)
MerchantId STRING(100)
HostName STRING(100)
HostTarget STRING(100)
strPost StringTheory
strHost StringTheory
CODE
lSecretKey = 'yourkey'
KeyId = 'yourid'
MerchantId = 'yourco'
HostName = 'apitest.cybersource.com'
HostTarget = 'post /pts/v2/payments/'
strPost.SetValue(CLIP(PostString))
strPost.SetValue(NetMakeHash(strPost.GetValuePtr(),strPost.Length(),net:CALG_SHA_256))
strPost.Base64Encode()
strHost.SetValue('host: ' & CLIP(HostName) & '<10>' &|
'(request-target): ' & CLIP(HostTarget) & '<10>' &|
'digest: SHA-256=' & strPost.GetValue() & '<10>' &|
'v-c-merchant-id: ' & CLIP(MerchantId) & '')
pWeb.CustomHeader = 'v-c-merchant-id: ' & CLIP(MerchantId) & '<13,10>' &|
'v-c-date: "' & CLIP(pWeb.CreateGMTDate()) & '"' & '<13,10>' &|
'digest: SHA-256=' & strPost.GetValue() & '<13,10>' &|
'Signature: keyid="' & CLIP(KeyId) & '", algorithm="HmacSHA256",' &|
' headers="host (request-target) digest v-c-merchant-id", signature="' &|
CyberSource:GenerateSignatureFromParams(strHost.GetValue(), lSecretKey) & '"'
CyberSource:GenerateSignatureFromParams PROCEDURE (STRING signatureParams,STRING secretKey) ! Declare Procedure
strParams StringTheory
strKey StringTheory
CODE
strParams.SetValue(signatureParams,st:clip)
strKey.SetValue(secretKey,st:clip)
strKey.Base64Decode()
strParams.ToUnicode()
strParams.SetValue(NetMakeHMAC(strParams.GetValuePtr(), strParams.Length(), strKey.GetValue(), net:CALG_SHA_256))
strParams.Base64Encode()
return strParams.GetValue()
3
Web Server - Ask For Help / WebService and SetSessionLoggedIn
« on: February 22, 2023, 10:56:42 AM »
I would like to have two services.
ServiceA is the login service call
ServiceB must have been logged in using ServiceA
Are there examples of how to use SetSessionLoggedIn with WebServices. I cant figure it out on my own. I saw that there was going to be a webinar on this but couldnt find it.
I tried SetSessionLoggedIn(True) in ServiceA but it appears that this has a different SessionID then when I try to GetSessionLoggedIn in ServiceB. I can see that there seams to be a cookie SessionIDX. but not sure if this is helpful or not. How I would use it in ServiceB.
I found this routine
CheckForToken routine
Should I be swapping out the session ID here? If so then how is that done? On the client I am suing nettalk for all calls to the web services.
Jeff
ServiceA is the login service call
ServiceB must have been logged in using ServiceA
Are there examples of how to use SetSessionLoggedIn with WebServices. I cant figure it out on my own. I saw that there was going to be a webinar on this but couldnt find it.
I tried SetSessionLoggedIn(True) in ServiceA but it appears that this has a different SessionID then when I try to GetSessionLoggedIn in ServiceB. I can see that there seams to be a cookie SessionIDX. but not sure if this is helpful or not. How I would use it in ServiceB.
I found this routine
CheckForToken routine
Should I be swapping out the session ID here? If so then how is that done? On the client I am suing nettalk for all calls to the web services.
Jeff
4
Web Server - Ask For Help / load Webhook POST data load to a queue
« on: May 10, 2022, 08:32:27 AM »
How can I access the POST data section and load this into a group.
The data is in json format. I have tried my best to work with p_web.RequestData.
Here is the group
element Group,Name('element')
notificationId STRING(255),Name('notificationId')
eventType STRING(255),Name('eventType')
eventDate STRING(255),Name('eventDate')
webhookId STRING(255),Name('webhookId')
payload Group,Name('payload')
responseCode Real,Name('responseCode')
authCode STRING(255),Name('authCode')
avsResponse STRING(255),Name('avsResponse')
authAmount Real,Name('authAmount')
invoiceNumber STRING(255),Name('invoiceNumber')
entityName STRING(255),Name('entityName')
id STRING(255),Name('id')
End
End
json jsonClass
json.start()
json.SetTagCase(jf:CaseAsIs)
json.Load(element,p_web.RequestData.DataStringTheory) ! Load From a StringTheory object
This code GPF's
This is the POST data
{"notificationId":"1a5bf2dd-e05d-4224-8157-459f0f11f40e","eventType":"net.authorize.payment.authcapture.created","eventDate":"2022-05-06T08:49:50.3674712Z","webhookId":"5f77108b-039f-4c20-9157-b0b9049c4ddf","payload":{"responseCode":1,"authCode":"AQSOEP","avsResponse":"P","authAmount":123.1,"invoiceNumber":"211210110","entityName":"transaction","id":"40091147498"}}
Jeff
The data is in json format. I have tried my best to work with p_web.RequestData.
Here is the group
element Group,Name('element')
notificationId STRING(255),Name('notificationId')
eventType STRING(255),Name('eventType')
eventDate STRING(255),Name('eventDate')
webhookId STRING(255),Name('webhookId')
payload Group,Name('payload')
responseCode Real,Name('responseCode')
authCode STRING(255),Name('authCode')
avsResponse STRING(255),Name('avsResponse')
authAmount Real,Name('authAmount')
invoiceNumber STRING(255),Name('invoiceNumber')
entityName STRING(255),Name('entityName')
id STRING(255),Name('id')
End
End
json jsonClass
json.start()
json.SetTagCase(jf:CaseAsIs)
json.Load(element,p_web.RequestData.DataStringTheory) ! Load From a StringTheory object
This code GPF's
This is the POST data
{"notificationId":"1a5bf2dd-e05d-4224-8157-459f0f11f40e","eventType":"net.authorize.payment.authcapture.created","eventDate":"2022-05-06T08:49:50.3674712Z","webhookId":"5f77108b-039f-4c20-9157-b0b9049c4ddf","payload":{"responseCode":1,"authCode":"AQSOEP","avsResponse":"P","authAmount":123.1,"invoiceNumber":"211210110","entityName":"transaction","id":"40091147498"}}
Jeff
5
Web Server - Ask For Help / How do I update a record from a netweb browse button
« on: October 08, 2021, 07:28:36 AM »
I want to run a source procedure from a betwebbrowse button
I created my button and onclick I put the name of the procedure. When I run my website I get a message that the page is not found.
What I want to do is add a button to a browse (I think I figured this out) call my source (not sure i understand how this works) and have my source re serve the browse it was called from.
Ideally an example app i can look at would be fantastic!
Here is my source.
UpdateMSCCLSource PROCEDURE (NetWebServerWorker p_web) ! Declare Procedure
FilesOpened BYTE(0)
CODE
DO OpenFiles
MSCCS:SystemGUID = p_web.GetSessionValue('MSCCS:SystemGUID')
IF Access:MSCCS.Fetch(MSCCS:SystemGUIDKey) = Level:Benign AND MSCCS:SessionState <> 'Inactive'
MSCCS:Action = 0
Access:MSCCS.Update()
END
DO CloseFiles
OpenFiles ROUTINE
Access:MSCCS.Open()
Access:MSCCS.UseFile()
FilesOpened = True
CloseFiles ROUTINE
IF FilesOpened THEN
Access:MSCCS.Close()
FilesOpened = False
END
Thank You.
I created my button and onclick I put the name of the procedure. When I run my website I get a message that the page is not found.
What I want to do is add a button to a browse (I think I figured this out) call my source (not sure i understand how this works) and have my source re serve the browse it was called from.
Ideally an example app i can look at would be fantastic!
Here is my source.
UpdateMSCCLSource PROCEDURE (NetWebServerWorker p_web) ! Declare Procedure
FilesOpened BYTE(0)
CODE
DO OpenFiles
MSCCS:SystemGUID = p_web.GetSessionValue('MSCCS:SystemGUID')
IF Access:MSCCS.Fetch(MSCCS:SystemGUIDKey) = Level:Benign AND MSCCS:SessionState <> 'Inactive'
MSCCS:Action = 0
Access:MSCCS.Update()
END
DO CloseFiles
OpenFiles ROUTINE
Access:MSCCS.Open()
Access:MSCCS.UseFile()
FilesOpened = True
CloseFiles ROUTINE
IF FilesOpened THEN
Access:MSCCS.Close()
FilesOpened = False
END
Thank You.
6
Web Server - Ask For Help / How to add CSS and apply to a button on a netwebform
« on: April 21, 2020, 11:18:46 AM »
I have a custom css file located in
application folder\web\styles\custom.css
I added a class like the following
.msc-OptionButton {
display: block;
width: 5em;
height: 2em;
border: none;
background-color: red;
color: black;
padding: 1px 1px;
font-size: 48px !important;
text-align: center;
}
I the NetTalk ThisWebServer under Settings->styles->Files->CSS Style Files have my Custom.css file listed 'Custom.css' Browser all and is included in themese.css checked.
Under NetWeb Form->Actions->Fields->Properties->Field BUTTON properties->CSS->Button CSS Class='msc-optionbutton'
When I inspect the element in chrome I see the following
<button type="button" name="WebLookup_AccountDetail_btn" id="WebLookup_AccountDetail_btnh8o8" value="Account Detail" class="nt-flex msc-optionbutton ui-button ui-corner-all ui-widget" onclick="location.href='WebLookup_AccountDetailMenu?&PressedButton='" data-form="weblookup_accountpage">Account Detail</button>
I first see that my css class is listed before the ui-button class. I also can not get my button to use the css class.
Can someone help me put together the step I am missing? Is there a step by step on how to start using CSS?
Jeff Hojka
Khojant LLC
application folder\web\styles\custom.css
I added a class like the following
.msc-OptionButton {
display: block;
width: 5em;
height: 2em;
border: none;
background-color: red;
color: black;
padding: 1px 1px;
font-size: 48px !important;
text-align: center;
}
I the NetTalk ThisWebServer under Settings->styles->Files->CSS Style Files have my Custom.css file listed 'Custom.css' Browser all and is included in themese.css checked.
Under NetWeb Form->Actions->Fields->Properties->Field BUTTON properties->CSS->Button CSS Class='msc-optionbutton'
When I inspect the element in chrome I see the following
<button type="button" name="WebLookup_AccountDetail_btn" id="WebLookup_AccountDetail_btnh8o8" value="Account Detail" class="nt-flex msc-optionbutton ui-button ui-corner-all ui-widget" onclick="location.href='WebLookup_AccountDetailMenu?&PressedButton='" data-form="weblookup_accountpage">Account Detail</button>
I first see that my css class is listed before the ui-button class. I also can not get my button to use the css class.
Can someone help me put together the step I am missing? Is there a step by step on how to start using CSS?
Jeff Hojka
Khojant LLC
7
Web Server - Ask For Help / Browse button for a report
« on: April 20, 2020, 08:49:38 AM »
I have a browse button that calls a report. I need to have a browse that I conditionally load before the report is called.
Should I use redirection? If so how do I redirect from one nettalk webpage to another?
Jeff
Should I use redirection? If so how do I redirect from one nettalk webpage to another?
Jeff
8
Web Server - Ask For Help / Error in site JavaScript after upgrading to NetTalk 11
« on: December 10, 2019, 06:27:17 AM »
I have a site that was created using the Generate Web Site Template using a prior version on NetTalk. I recompiled using NT11. When I run this site I get "Error in site JavaScript". I used CTRL SHIFT I to examine what is going on. below is what I am seeing. Do I need to turn off "string MIME cheching"? Any suggestions on what is happening?
Jeff Hojka
Marathon Software Co.
(index):1 Refused to apply style from 'http://127.0.0.1:5098/themes/Smoothness/theme.css?c=1' because its MIME type ('text/html') is not a supported stylesheet MIME type, and strict MIME checking is enabled.
(index):4 GET http://127.0.0.1:5098/scripts/all.js?c=1 net::ERR_ABORTED 404 (The page cannot be found)
(index):1 Refused to apply style from 'http://127.0.0.1:5098/redactor/redactor.min.css?c=1' because its MIME type ('text/html') is not a supported stylesheet MIME type, and strict MIME checking is enabled.
(index):1 Refused to apply style from 'http://127.0.0.1:5098/styles/chrome.css?c=1' because its MIME type ('text/html') is not a supported stylesheet MIME type, and strict MIME checking is enabled.
(index):5 GET http://127.0.0.1:5098/redactor/redactor.min.js?c=1 net::ERR_ABORTED 404 (The page cannot be found)
(index):32 Uncaught ReferenceError: versionCheck is not defined
at (index):32
(anonymous) @ (index):32
(index):9 GET http://127.0.0.1:5098/images/logo.jpg 404 (The page cannot be found)
(index):11 GET http://127.0.0.1:5098/images/_busy.gif 404 (The page cannot be found)
Jeff Hojka
Marathon Software Co.
(index):1 Refused to apply style from 'http://127.0.0.1:5098/themes/Smoothness/theme.css?c=1' because its MIME type ('text/html') is not a supported stylesheet MIME type, and strict MIME checking is enabled.
(index):4 GET http://127.0.0.1:5098/scripts/all.js?c=1 net::ERR_ABORTED 404 (The page cannot be found)
(index):1 Refused to apply style from 'http://127.0.0.1:5098/redactor/redactor.min.css?c=1' because its MIME type ('text/html') is not a supported stylesheet MIME type, and strict MIME checking is enabled.
(index):1 Refused to apply style from 'http://127.0.0.1:5098/styles/chrome.css?c=1' because its MIME type ('text/html') is not a supported stylesheet MIME type, and strict MIME checking is enabled.
(index):5 GET http://127.0.0.1:5098/redactor/redactor.min.js?c=1 net::ERR_ABORTED 404 (The page cannot be found)
(index):32 Uncaught ReferenceError: versionCheck is not defined
at (index):32
(anonymous) @ (index):32
(index):9 GET http://127.0.0.1:5098/images/logo.jpg 404 (The page cannot be found)
(index):11 GET http://127.0.0.1:5098/images/_busy.gif 404 (The page cannot be found)
9
Web Server - Ask For Help / Web72 Enable button after progress is complete
« on: December 08, 2019, 11:44:21 AM »
I am using Web72 as an example. I add a button to the File progress tab. I have an include condition that is initially set to not include for this button. When the progress completes I want to include this button. I use a session value to store my new include condition (which is true). I cant get the page to refresh with this new condition. If I use the browser refresh than the button appears. What do I need to do after the progress completes to get the button to appear? Is there a way to issue a page reset? The progress knows how to disable the progress bar and I want to mimic this with a button. I tried to follow the code but cant really figure it out.
Jeff Hojka
Marathon Software Co.
Jeff Hojka
Marathon Software Co.
10
Web Server - Ask For Help / SSL certificate not working with android. The cipher used is obsolete
« on: May 04, 2016, 02:30:31 PM »
I have a SSL certificate from godaddy. I combined the certificate with the secondary cert. The SSL connection works great on everything I have tested accept Android. On my Android device I get the message.
You connection is encrypted using an obsolete cipher suite.
TLS1.2 The connection is encrypted using AES_256_CBC, with HMA-SHA1 for message authentication and RSA as key exchange mechanism.
NetTalk 8.59
Jeff Hojka
Marathon Software Co.
You connection is encrypted using an obsolete cipher suite.
TLS1.2 The connection is encrypted using AES_256_CBC, with HMA-SHA1 for message authentication and RSA as key exchange mechanism.
NetTalk 8.59
Jeff Hojka
Marathon Software Co.
11
Web Server - Ask For Help / I need to create fields for my report filters at runtiime.
« on: May 02, 2016, 09:33:26 AM »
All of my reports when run in windows uses range fields that are created at runtime. Anyone have ideas on how to duplicate this using nettalk.
Jeff Hojka
Jeff Hojka
12
FTP - Ask For Help / FTP File Transfer Issue.
« on: August 03, 2015, 09:52:43 AM »
I have a single client that I can't get the FTP file to transfer properly. The file will transfer around 36 mb of a 275 mb file and then suddenly jump to 100% and then get stuck.
I did some testing to try to find a solution.
1. I used the netdemo program nettalk V8.57 Claroin 10. The file transfer does the exact same thing. fails and then gets stuck.
2. I used windows command line FTP. This worked as expected.
3. I used a old version of nettalk (6.13) Using Clarion 8. This worked as expected.
I am not sure what would be the best way to try and debug this problem. This only occurs at this client. I can get FTP to work using other solutions.
Any suggestions?
Jeff Hojka
Marathon Software Co.
I did some testing to try to find a solution.
1. I used the netdemo program nettalk V8.57 Claroin 10. The file transfer does the exact same thing. fails and then gets stuck.
2. I used windows command line FTP. This worked as expected.
3. I used a old version of nettalk (6.13) Using Clarion 8. This worked as expected.
I am not sure what would be the best way to try and debug this problem. This only occurs at this client. I can get FTP to work using other solutions.
Any suggestions?
Jeff Hojka
Marathon Software Co.
13
Web Server - Ask For Help / ISL Error: 0
« on: July 31, 2015, 06:03:02 AM »
I upgraded from Clarion 9.0 to Clarion 10.0.
In the process I also upgraded NetTalk from 8.52 8.57
When I compiled my web application a lot of my browses got the error ISL Error: 0.
Most of these browses were template generated and had over 20 fields and buttons.
Reducing the number of browse fields and buttons to under 20 fixed the compile issue.
All modules have only 1 procedure.
Jeff Hojka
Marathon software Co.
In the process I also upgraded NetTalk from 8.52 8.57
When I compiled my web application a lot of my browses got the error ISL Error: 0.
Most of these browses were template generated and had over 20 fields and buttons.
Reducing the number of browse fields and buttons to under 20 fixed the compile issue.
All modules have only 1 procedure.
Jeff Hojka
Marathon software Co.
14
Web Server - Ask For Help / ssl csr question.
« on: January 16, 2012, 11:36:03 AM »
Our site will be set up to use a nonstandard port for ssl. The standard port is already being used by another application. We would like to create a CSR for the site on the new port. When I create my CSR do I need to add the port number for a single site license?
Example from docs:
g. Common Name: this is the URL that people will use to access your web site. For example www.capesoft.com
Would I use www.mysite.com:499 or does a single site license cover all ports?
Jeff Hojka
Marathon software Co.
Example from docs:
g. Common Name: this is the URL that people will use to access your web site. For example www.capesoft.com
Would I use www.mysite.com:499 or does a single site license cover all ports?
Jeff Hojka
Marathon software Co.
15
Web Server - Ask For Help / The State of NetTalk Documentation
« on: January 11, 2012, 11:05:23 AM »
I have been struggling with nettalk web server for some time now. I have used several CapeSoft products in the past and have always felt that the documentation was a strong point. I honestly have to say that the documentation for the Web Server part of NetTalk is not only poor but on the verge of being useless. If I was not already committed to the project I am working on I would honestly return this product. I find myself spending hours just to try and do simple things. I understand that the NetTalk server combines many different concepts and I do not expect the documentation to teach me these concepts. I do expect that the documentation will explain all of the internal methods and settings. I would also expect that there would be examples in the documentation on how to implement each field on each template with screen shots. I would like to see more time spent working on documentation before any future enhancements are made. Just my opinion on what may be a great product if it was not this hard to get started.
Jeff Hojka
Marathon software Co.
Jeff Hojka
Marathon software Co.
Pages: [1] 2