NetTalk Central

NetTalk Web Server => Web Server - Ask For Help => Topic started by: wasatchconsulting on August 15, 2021, 06:47:28 PM

Title: Secwin and Second Factor
Post by: wasatchconsulting on August 15, 2021, 06:47:28 PM

I was testing the Secwin 7 in NetTalk 12 with the second factor. I tested the example using the second factor with email. The login comes up asking for the code, but no email is getting sent. I placed a STOP in the procedure for sending the email and I am not getting a break. I am using the default Secwin login procedure. Any ideas as to what I can try?

Thanks
Ken Watts

Title: Re: Secwin and Second Factor
Post by: Bruce on August 15, 2021, 10:42:26 PM

Hi Ken,

Do you have a SendEmail procedure in your app, that you can send other emails from?
ie a NetTalk procedure, which has the settings for an email server etc?

If not, then I need to point you in this direction -https://www.capesoft.com/docs/NetTalk12/NetTalkEmail.Htm
I you do, and you are sending emails ok, then I need to send you in another direction.

Cheers
Bruce

Title: Re: Secwin and Second Factor
Post by: wasatchconsulting on August 16, 2021, 06:15:20 AM

There is a SendEmail procedure in the application and it works when sending the "forgot password" process.

Thanks
Ken Watts

Title: Re: Secwin and Second Factor
Post by: wasatchconsulting on August 23, 2021, 08:11:22 AM

Bruce,

Anymore thoughts on this. You indicated that you would send me in another direction if emails are set up and working (which they are).

Thanks
Ken Watts

Title: Re: Secwin and Second Factor
Post by: Bruce on August 24, 2021, 07:19:45 PM

Hi Ken,

maybe join the OpenClarion webinar on Wednesday, or the NetTalk one on thursday, and I can then look and see what you have done. Not a lot to go wrong here, but easiest if I can see your app.

Cheers
Bruce

Title: Re: Secwin and Second Factor
Post by: wasatchconsulting on August 25, 2021, 12:36:39 PM

I will join the NetTalk one on Thursday. Thanks
Ken