This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Web Server - Ask For Help / Indistinguishable new prototype: GETMACHINEID
« on: January 11, 2022, 09:52:40 PM »
Indistinguishable new prototype: GETMACHINEID
I have a webapp using Nettalk 12:33, Mytable 1.22, SecWin 7.26
but getting the error
Kind regards
Louis
I have a webapp using Nettalk 12:33, Mytable 1.22, SecWin 7.26
but getting the error
Kind regards
Louis
2
Web Server - Ask For Help / Embed point for secwin7 password message
« on: December 06, 2021, 05:56:30 AM »
Hi Everyone
I?m using secwin7 and Nettalk 12.29 mail to reset password in webapp using checklist in the documentation. I can have requested a mail password reset and I receive mail etc. Everything works as expected.
My question is:
How or where do I modify the message that secwin7 generates to send to the user? I don?t seem to find it.
Kind regards
Louis
I?m using secwin7 and Nettalk 12.29 mail to reset password in webapp using checklist in the documentation. I can have requested a mail password reset and I receive mail etc. Everything works as expected.
My question is:
How or where do I modify the message that secwin7 generates to send to the user? I don?t seem to find it.
Kind regards
Louis
3
Web Server - Ask For Help / Secwin Custom attributes
« on: October 20, 2021, 12:11:56 AM »
I use secwin in my webapp for users to create their own accounts and then reviewed by the Sysadmin. I need some more information from the user than just the normal user name phone number ect. I Managed to add the fields I wanted to into the Local data table and it works great! However! How to I get the custom fields added to my user security database.
The logon name, name and default security group all gets to the SecwinUsers table. How to I define and use my custom fields,
Regards
Louis
The logon name, name and default security group all gets to the SecwinUsers table. How to I define and use my custom fields,
Regards
Louis
4
Web Server - Ask For Help / ServiceName error.
« on: July 03, 2021, 11:05:00 PM »
Gooday everyone
I upgraded one of my Nettalk11 applications to Nettalk12 and it compiled without any problem
However, if I log in to the web app I get the following error (see attachment . I'm not sure where to set the serviceName =
Kind regards
Louis Keyser
I upgraded one of my Nettalk11 applications to Nettalk12 and it compiled without any problem
However, if I log in to the web app I get the following error (see attachment . I'm not sure where to set the serviceName =
Kind regards
Louis Keyser
5
Web Server - Ask For Help / Please assist with translate question
« on: February 12, 2020, 12:11:02 AM »
I hope i'm not pulling a stunt that can't be done.
I'm adding a small sample app of my problem.
I have to write a multi language webapp..
I can translate all headers in browser and Forms, menus, including some data on a drop list.
But the data in the browse does not translate the data.
In the sample I'm showing that Gender translates 100% in the form as a drop list when your select an alternative language.
but shows as the default Language in the browse.
Please assist me in to correct approach to this problem.
Many Thanks
I'm adding a small sample app of my problem.
I have to write a multi language webapp..
I can translate all headers in browser and Forms, menus, including some data on a drop list.
But the data in the browse does not translate the data.
In the sample I'm showing that Gender translates 100% in the form as a drop list when your select an alternative language.
but shows as the default Language in the browse.
Please assist me in to correct approach to this problem.
Many Thanks
6
Web Server - Ask For Help / Multisite and selfservice
« on: January 09, 2020, 12:28:18 AM »
Hi everyone.
Having problems getting Multisite to run as a service. Keep on getting Error 1053
The exe I run as administrator when installing the service ect, with admin rights on the Computer / server ...
I'm using Multisite "Out of the box" at this stage. All works fine without running as a service.
Just for a sanity check I created a small app and added selfservice to the app and that I can install and run as a service.
Im running
NT 11.28
Selfservice 3.52
StringTheory 3.15
Winevent 5.29
GPF Reportter 2.36
Draw 4.20
MessageBox 2.45
If anyone has the same problem and resolved it, help me please
Regards
Having problems getting Multisite to run as a service. Keep on getting Error 1053
The exe I run as administrator when installing the service ect, with admin rights on the Computer / server ...
I'm using Multisite "Out of the box" at this stage. All works fine without running as a service.
Just for a sanity check I created a small app and added selfservice to the app and that I can install and run as a service.
Im running
NT 11.28
Selfservice 3.52
StringTheory 3.15
Winevent 5.29
GPF Reportter 2.36
Draw 4.20
MessageBox 2.45
If anyone has the same problem and resolved it, help me please
Regards
7
Web Server - Ask For Help / Lost in translation
« on: August 19, 2019, 04:51:33 AM »
Hi Everyone
I'm having to following problem when exporting a browse to and xml file using xfiles and nettalk to excel,
Capture1.png shows the data in browser.
Capture2.png shows the result in Excel.
My Character set in Nettalk is set to UTF-8 and (capture3.png)
My character set in Xfiles is to UTF-8 (Capture4.png)
I have attached a small sample app
Many thanks
Louis
I'm not sure what im doing wrong ?
I'm having to following problem when exporting a browse to and xml file using xfiles and nettalk to excel,
Capture1.png shows the data in browser.
Capture2.png shows the result in Excel.
My Character set in Nettalk is set to UTF-8 and (capture3.png)
My character set in Xfiles is to UTF-8 (Capture4.png)
I have attached a small sample app
Many thanks
Louis
I'm not sure what im doing wrong ?
8
Web Server - Ask For Help / Question on NetRefresh on a webapp.
« on: May 29, 2019, 01:46:24 AM »
Hi Everyone
I have a question on NetRefresh on a webapp.
When I browse a table and update the values, it works perfect as per the example Realtime (85).
My Problem
I change and add records in a different part of the app with some hand code. When this code executes the table browse does not update, although the data do change.
Is there a command that I must send to the webserver to tell it to refresh the table in the hand code?
Many thanks
Louis
I have a question on NetRefresh on a webapp.
When I browse a table and update the values, it works perfect as per the example Realtime (85).
My Problem
I change and add records in a different part of the app with some hand code. When this code executes the table browse does not update, although the data do change.
Is there a command that I must send to the webserver to tell it to refresh the table in the hand code?
Many thanks
Louis
9
Web Server - Ask For Help / Menu Flashes all option briefly
« on: March 07, 2019, 12:20:43 AM »
Hi everyone
Using
Clarion 10,
NT11.07,
String theory 3.05
I'm using the 'base' theme with 'double drop menus'
If I click on the menu with sub options. Every menu item briefly flashes on screen.
I seem to recall that is was a problem with earlier NT11 releases?
If anyone has a tip or theme that works it will be super..
Many thanks
Kind regards
Louis
Using
Clarion 10,
NT11.07,
String theory 3.05
I'm using the 'base' theme with 'double drop menus'
If I click on the menu with sub options. Every menu item briefly flashes on screen.
I seem to recall that is was a problem with earlier NT11 releases?
If anyone has a tip or theme that works it will be super..
Many thanks
Kind regards
Louis
10
Web Server - Ask For Help / Nettalk 11.03 menu problem
« on: November 21, 2018, 01:11:12 AM »
After installing Nettalk 11.03 my menu's breaks..
in the URL, or link it adds the "&" into the link on the browse.
http://localhost:88/BrowseSecurity&
removing the & manually in the browse it goes to the correct link.
is there something im doing wrong ?
Regards
Louis
in the URL, or link it adds the "&" into the link on the browse.
http://localhost:88/BrowseSecurity&
removing the & manually in the browse it goes to the correct link.
is there something im doing wrong ?
Regards
Louis
11
The Rest - Ask For Help / fomat in webbrowse for json export
« on: November 05, 2018, 10:04:11 PM »
Please assist
I don?t know what the syntax should be in json on a to export a webbrowse in nettalk..
I would like to have the same ?function? to export a browse to json format as the current xml export that has automated.
The syntax in for s view in clarion is?Taken from the demo in json
json.start()
json.save(BRW1::View:Browse,'customers.json','Customers')
TextViewer('customers.json')
If I want this in a webbrowse, whats the correct syntax please
Many thanks
Louis
I don?t know what the syntax should be in json on a to export a webbrowse in nettalk..
I would like to have the same ?function? to export a browse to json format as the current xml export that has automated.
The syntax in for s view in clarion is?Taken from the demo in json
json.start()
json.save(BRW1::View:Browse,'customers.json','Customers')
TextViewer('customers.json')
If I want this in a webbrowse, whats the correct syntax please
Many thanks
Louis
12
The Rest - Ask For Help / Convert latitude and longitude to decimal coordinates to degrees minutes seconds
« on: March 08, 2018, 02:21:22 AM »
Hi Everyone
The new Map feature works great !! thanks Cape Soft
One of my Client API's that I interface with, needs to DMS info from my app.
Is there a method to change latitude and longitude to DMS format ?
Is this possible ?
Many Thanks
Louis
The new Map feature works great !! thanks Cape Soft
One of my Client API's that I interface with, needs to DMS info from my app.
Is there a method to change latitude and longitude to DMS format ?
Is this possible ?
Many Thanks
Louis
13
Web Server - Ask For Help / Get variables back from Java
« on: October 23, 2017, 05:11:29 AM »
I'm just using to geolocation as an example for my question.
I can see the the values returning in the console of NT, but i don't know what I am doing wrong to retrieve the values back to the two local variables, in this case the longitude and latitude values.
GET /SetSessionValue?_Latitude_=-28.662680899999998&_Longitude_=23.853461&_Altitude_=0&_Accuracy_=30&_AltitudeAccuracy_=0&_Heading_=NaN&_Speed_=NaN&_LocationUnixTime_=1508764130&_LocationDate_=79192&_LocationTime_=4733027&_LocationError_=&_ajax_=1 HTTP/1.1
I have include a small example.
Thanks
Regards
Louis
Clarion 10
NT10
I can see the the values returning in the console of NT, but i don't know what I am doing wrong to retrieve the values back to the two local variables, in this case the longitude and latitude values.
GET /SetSessionValue?_Latitude_=-28.662680899999998&_Longitude_=23.853461&_Altitude_=0&_Accuracy_=30&_AltitudeAccuracy_=0&_Heading_=NaN&_Speed_=NaN&_LocationUnixTime_=1508764130&_LocationDate_=79192&_LocationTime_=4733027&_LocationError_=&_ajax_=1 HTTP/1.1
I have include a small example.
Thanks
Regards
Louis
Clarion 10
NT10
14
Web Server - Ask For Help / Scheduled daily task
« on: June 09, 2016, 04:27:36 AM »
Hi everyone
I need some assistance or guidance.
My problem
I have a list of products that need to be flagged, sell by date expired.
I need to run a scheduled task on a daily basis to flag these products.
Where do I add this in the code, or do I need to create an external application and use a timer event on a windows to get this right.
If anyone van help me.
Regards
Louis
I need some assistance or guidance.
My problem
I have a list of products that need to be flagged, sell by date expired.
I need to run a scheduled task on a daily basis to flag these products.
Where do I add this in the code, or do I need to create an external application and use a timer event on a windows to get this right.
If anyone van help me.
Regards
Louis
15
Web Server - Ask For Help / Export to xml stopped working.
« on: August 23, 2015, 01:32:05 AM »
Hi everyone
I have a strange problem that sneaked into my app.
Have a browse with 3 x local variables string, and start and end date.
I use it to filter the browse and then export function (xml) on the template.
This all works 100% in Nettalk 8.56 build.
After upgrading to 8.59 this stopped working. The filters still applies and if you click on the export button, the browser just sits there, no error to indicate if something has gone wrong. The web Server tries every 2 seconds to get the report
I reinstalled build 8.55 and all is back to normal.
Anyone have the same problem?
Thanks
Louis
[attachment deleted by admin]
I have a strange problem that sneaked into my app.
Have a browse with 3 x local variables string, and start and end date.
I use it to filter the browse and then export function (xml) on the template.
This all works 100% in Nettalk 8.56 build.
After upgrading to 8.59 this stopped working. The filters still applies and if you click on the export button, the browser just sits there, no error to indicate if something has gone wrong. The web Server tries every 2 seconds to get the report
I reinstalled build 8.55 and all is back to normal.
Anyone have the same problem?
Thanks
Louis
[attachment deleted by admin]