This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
46
Web Server - Ask For Help / Re: Refresh Child Browse after populating
« on: December 30, 2013, 01:59:54 PM »
Hi Uayoan
Wow - It is working . Thank you so much.!!!!!!
Been much a pain to get it resolved.
Didn't even think to try this.
Thanks again.
Cheers
Wow - It is working . Thank you so much.!!!!!!
Been much a pain to get it resolved.
Didn't even think to try this.
Thanks again.
Cheers
47
Web Server - Ask For Help / Re: Refresh Child Browse after populating
« on: December 27, 2013, 10:38:19 AM »
I'm sure i am doing something major wrong. not following a rule as I should.
Please find attached sample.
Username DEMO.
Password is DEMO,
Regards
Louis
[attachment deleted by admin]
Please find attached sample.
Username DEMO.
Password is DEMO,
Regards
Louis
[attachment deleted by admin]
48
Web Server - Ask For Help / Refresh Child Browse after populating
« on: December 27, 2013, 08:32:42 AM »
Hi All
I have a small order system.
I have a pr-defined order list that I need to generate. See attachment 1
If I click on the Generate button it writes the records into the database, but do not re-fresh the browse listed below. If you go out of the browse and open the order again, the browse is populated.
I am resetting the child browse after clicking on the button. No joy
Please help me. How do I refresh the browse?
Many Thanks
Louis
[attachment deleted by admin]
I have a small order system.
I have a pr-defined order list that I need to generate. See attachment 1
If I click on the Generate button it writes the records into the database, but do not re-fresh the browse listed below. If you go out of the browse and open the order again, the browse is populated.
I am resetting the child browse after clicking on the button. No joy
Please help me. How do I refresh the browse?
Many Thanks
Louis
[attachment deleted by admin]
49
Web Server - Ask For Help / Re: Rename search button and change the requered fild
« on: August 07, 2013, 04:25:07 AM »
Thanks you so much Bruce. Got it going
Regards
Louis
Regards
Louis
50
Web Server - Ask For Help / Rename search button and change the requered fild
« on: August 06, 2013, 08:08:40 AM »
Hi Everyone.
Small problem I have or lack of knowhow.
I'm developing a website in a different language.
I managed to change all the buttons to the correct language except the search button at the top of the browse. Where change I do this?
My second question is:
In the comment field. For example.
When I add a field that is required. The “required” comment display next to the field (as it should)
Is there a global area where I can change this? Or do I need to do it field by field in the form.
Regards
Louis
Small problem I have or lack of knowhow.
I'm developing a website in a different language.
I managed to change all the buttons to the correct language except the search button at the top of the browse. Where change I do this?
My second question is:
In the comment field. For example.
When I add a field that is required. The “required” comment display next to the field (as it should)
Is there a global area where I can change this? Or do I need to do it field by field in the form.
Regards
Louis
51
Web Server - Ask For Help / Parent Child display problem NT7.14
« on: July 04, 2013, 11:34:57 PM »
Hi everyone
I have a 2 browses parent -> child
On NetTalk 7.10 everything was ok (See attachment)
After upgrading to 7.14 the browser don’t look as expected. (See attachment)
Please help.
Regards
Louis
[attachment deleted by admin]
I have a 2 browses parent -> child
On NetTalk 7.10 everything was ok (See attachment)
After upgrading to 7.14 the browser don’t look as expected. (See attachment)
Please help.
Regards
Louis
[attachment deleted by admin]
52
The Rest - Ask For Help / Re: Using Host app to run mssql and mysql
« on: May 23, 2013, 05:30:47 AM »
Hi Bruce an Olu
I have the same question (How should the connection string typical look like using, FM3 with MS-SQL on your dll side ?
The multi-site documentation explains how to connect to tps file and i have done this on a few sites - works great:) Thanks Bruce
Lack of SQL connection string "know how "stops me to converting to SQL.
Will be great if you can five us a sample.
Regards
Louis
I have the same question (How should the connection string typical look like using, FM3 with MS-SQL on your dll side ?
The multi-site documentation explains how to connect to tps file and i have done this on a few sites - works great:) Thanks Bruce
Lack of SQL connection string "know how "stops me to converting to SQL.
Will be great if you can five us a sample.
Regards
Louis
53
Web Server - Ask For Help / Re: Exception error after upgrading to 7.06
« on: March 11, 2013, 12:01:12 PM »
Helps if you read the history on new releases. Reloaded stringtheory in global - worked !
Thanks
Thanks
54
Web Server - Ask For Help / Re: Exception error after upgrading to 7.06
« on: March 09, 2013, 09:15:01 AM »
Same this side.. If I compile on Clarion 6.3 with new nettalk (7.06) it work 100%
But
If I compile with Clarion 8 I get
Exception occurred at address 01022BCD
Exception code C0000005: Access Violation
Process PID=5248
The exe compiles and runs. But as soon as the browser connects to the Nettalk Server it gives exception error.
Regards
Louis
But
If I compile with Clarion 8 I get
Exception occurred at address 01022BCD
Exception code C0000005: Access Violation
Process PID=5248
The exe compiles and runs. But as soon as the browser connects to the Nettalk Server it gives exception error.
Regards
Louis
55
Web Server - Ask For Help / Re: NT7 link not active?
« on: December 03, 2012, 08:49:07 AM »
Check out the webinar of Friday. You will find the answer
Regards
Louis
Regards
Louis
56
Web Server - Ask For Help / Custom theme - Tabs not working
« on: November 21, 2012, 08:58:29 AM »
HI All
My problem:” If I use custom themes my TABS do not work. However if I use the themes shipped with NT 6.51 ..\\..web\themes\redmond they work fine.
I downloaded “Black Tie” from jquery , Copied it into the ..\web\themes folder, removed the version number ect. The theme applies to the website without problems. But the TABS do not work.
Any idea what the problem can be ?.
Im Using Clarion 8.0.9661, with NT 6.51.
Thanks
Louis
My problem:” If I use custom themes my TABS do not work. However if I use the themes shipped with NT 6.51 ..\\..web\themes\redmond they work fine.
I downloaded “Black Tie” from jquery , Copied it into the ..\web\themes folder, removed the version number ect. The theme applies to the website without problems. But the TABS do not work.
Any idea what the problem can be ?.
Im Using Clarion 8.0.9661, with NT 6.51.
Thanks
Louis
57
Web Server - Ask For Help / Re: MultiSite with FM3 and SQL
« on: June 03, 2012, 10:35:35 AM »
Im getting this almost right My dll's dont GPF anymore, But my dll applications are not connecting to SQL via FM3.
Can anyone assist me with the correct syntax to a MS SQL SERVER? Am I correct in saying that I can’t use the GUI in the dll to connect to the SQL backend?
Many thanks
Louis
Can anyone assist me with the correct syntax to a MS SQL SERVER? Am I correct in saying that I can’t use the GUI in the dll to connect to the SQL backend?
Many thanks
Louis
58
Web Server - Ask For Help / Re: MultiSite with FM3 and SQL
« on: April 28, 2012, 01:21:07 AM »
Thanks Bruce.
I think the penny has dropped
I think the penny has dropped
59
Web Server - Ask For Help / MultiSite with FM3 and SQL
« on: April 27, 2012, 03:07:37 PM »
HI everyone
Please help !
My scenario
http://Site1.mydomain.com connecting to SQL Database1 using FM3 with SQL Connector
http://Site2.mydomain.com connecting to SQL Database2 using FM3 with SQL Connector
If I compile them as exe with each running on different ports its working fine.
BUT
To run them both on port 80 connecting both to SQL seems to be a bit of a challenge for me.
I got the example MultiSite6 (59) working fine with tps files.
My questions
Should I be using the SQL connector of FM3 GUI interface ?
How does the compiled DLL’s reference the different FM3.ini file. It seems to default to the folder where the host,exe lives?
Where should the embed points be for the tables?
If I need to use connector string. How should they look like ?
Thanks
Louis
Please help !
My scenario
http://Site1.mydomain.com connecting to SQL Database1 using FM3 with SQL Connector
http://Site2.mydomain.com connecting to SQL Database2 using FM3 with SQL Connector
If I compile them as exe with each running on different ports its working fine.
BUT
To run them both on port 80 connecting both to SQL seems to be a bit of a challenge for me.
I got the example MultiSite6 (59) working fine with tps files.
My questions
Should I be using the SQL connector of FM3 GUI interface ?
How does the compiled DLL’s reference the different FM3.ini file. It seems to default to the folder where the host,exe lives?
Where should the embed points be for the tables?
If I need to use connector string. How should they look like ?
Thanks
Louis
60
Web Server - Ask For Help / Re: JQUERY calendar translation
« on: January 16, 2012, 02:48:18 PM »
Thanks Peter
I copied your code and it Worked !!!!!
BUT
If you look at the Hotdates (12) example the “Larger” calendar date formats does not seem to inherit the same settings.
The small popup calendars works great! Any suggestions ?
Thanks
Louis
[attachment deleted by admin]
I copied your code and it Worked !!!!!
BUT
If you look at the Hotdates (12) example the “Larger” calendar date formats does not seem to inherit the same settings.
The small popup calendars works great! Any suggestions ?
Thanks
Louis
[attachment deleted by admin]